]> begriffs open source - freertos/blob - portable/Paradigm/Tern_EE/large_untested/portmacro.h
[AUTO][RELEASE]: Bump file header version to "10.4.6"
[freertos] / portable / Paradigm / Tern_EE / large_untested / portmacro.h
1 /*\r
2  * FreeRTOS Kernel V10.4.6\r
3  * Copyright (C) 2021 Amazon.com, Inc. or its affiliates.  All Rights Reserved.\r
4  *\r
5  * SPDX-License-Identifier: MIT\r
6  *\r
7  * Permission is hereby granted, free of charge, to any person obtaining a copy of\r
8  * this software and associated documentation files (the "Software"), to deal in\r
9  * the Software without restriction, including without limitation the rights to\r
10  * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of\r
11  * the Software, and to permit persons to whom the Software is furnished to do so,\r
12  * subject to the following conditions:\r
13  *\r
14  * The above copyright notice and this permission notice shall be included in all\r
15  * copies or substantial portions of the Software.\r
16  *\r
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\r
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS\r
19  * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR\r
20  * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER\r
21  * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN\r
22  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.\r
23  *\r
24  * https://www.FreeRTOS.org\r
25  * https://github.com/FreeRTOS\r
26  *\r
27  */\r
28 \r
29 #ifndef PORTMACRO_H\r
30 #define PORTMACRO_H\r
31 \r
32 #ifdef __cplusplus\r
33 extern "C" {\r
34 #endif\r
35 \r
36 /*-----------------------------------------------------------\r
37  * Port specific definitions.\r
38  *\r
39  * The settings in this file configure FreeRTOS correctly for the\r
40  * given hardware and compiler.\r
41  *\r
42  * These settings should not be altered.\r
43  *-----------------------------------------------------------\r
44  */\r
45 \r
46 /* Type definitions. */\r
47 #define portCHAR                char\r
48 #define portFLOAT               float\r
49 #define portDOUBLE              long\r
50 #define portLONG                long\r
51 #define portSHORT               int\r
52 #define portSTACK_TYPE  uint16_t\r
53 #define portBASE_TYPE   short\r
54 \r
55 typedef portSTACK_TYPE StackType_t;\r
56 typedef short BaseType_t;\r
57 typedef unsigned short UBaseType_t;\r
58 \r
59 \r
60 #if( configUSE_16_BIT_TICKS == 1 )\r
61         typedef uint16_t TickType_t;\r
62         #define portMAX_DELAY ( TickType_t ) 0xffff\r
63 #else\r
64         typedef uint32_t TickType_t;\r
65         #define portMAX_DELAY ( TickType_t ) 0xffffffffUL\r
66 #endif\r
67 /*-----------------------------------------------------------*/\r
68 \r
69 /* Critical section handling. */\r
70 #define portENTER_CRITICAL()                    __asm{ pushf }  \\r
71                                                                                 __asm{ cli       }      \\r
72 \r
73 #define portEXIT_CRITICAL()                             __asm{ popf }\r
74 \r
75 #define portDISABLE_INTERRUPTS()                __asm{ cli }\r
76 \r
77 #define portENABLE_INTERRUPTS()                 __asm{ sti }\r
78 /*-----------------------------------------------------------*/\r
79 \r
80 /* Hardware specifics. */\r
81 #define portNOP()                                               __asm{ nop }\r
82 #define portSTACK_GROWTH                                ( -1 )\r
83 #define portSWITCH_INT_NUMBER                   0x80\r
84 #define portYIELD()                                             __asm{ int portSWITCH_INT_NUMBER }\r
85 #define portTICK_PERIOD_MS                              ( ( TickType_t ) 1000 / configTICK_RATE_HZ )\r
86 #define portBYTE_ALIGNMENT                              2\r
87 #define portINITIAL_SW                                  ( ( portSTACK_TYPE ) 0x0202 )   /* Start the tasks with interrupts enabled. */\r
88 /*-----------------------------------------------------------*/\r
89 \r
90 /* Compiler specifics. */\r
91 #define portINPUT_BYTE( xAddr )                         inp( xAddr )\r
92 #define portOUTPUT_BYTE( xAddr, ucValue )       outp( xAddr, ucValue )\r
93 #define portINPUT_WORD( xAddr )                         inpw( xAddr )\r
94 #define portOUTPUT_WORD( xAddr, usValue )       outpw( xAddr, usValue )\r
95 /*-----------------------------------------------------------*/\r
96 \r
97 /* Task function macros as described on the FreeRTOS.org WEB site. */\r
98 #define portTASK_FUNCTION_PROTO( vTaskFunction, vParameters ) void vTaskFunction( void *pvParameters )\r
99 #define portTASK_FUNCTION( vTaskFunction, vParameters ) void vTaskFunction( void *pvParameters )\r
100 \r
101 #ifdef __cplusplus\r
102 }\r
103 #endif\r
104 \r
105 \r
106 #endif /* PORTMACRO_H */\r
107 \r